Options | twist TX8612 / 8608/1804/1806

Wire twist equipment

Features

• Small, lightweight (our conventional ratio by volume 1/3, weight 1/4)
Twist line length (end with L models) up to 500mm
• If you want to use in F1 controller winding machine control device is not required in order to control winding machine directly.
• If you are using the old winding machine, etc. You can use an optional controller and set.
TX8608-8612

Specification

F1 controller control Another location control BOX
Apply wire diameter φ0.018 ~ φ0.15mm
Power-supply voltage Single-phase AC200 ~ 230 (V) ± 10%
Power consumption 500W
Machine body weight TX1804 / TX1806 20㎏
TX8608 / TX8612 25kg L type 5kg
TX1804 / TX1806 25kg
TX8608 / TX8612 30kg L type up 5kg
Machine body dimensions TX1804 / TX1806 380 (W) × 540 (D) × 140 (H) mm
TX8608 / TX8612 580 (W) × 540 (D) × 140 (H) mm
TX1804L / TX1806L 380 (W) × 740 (D) × 140 (H) mm
TX8608L / TX8612L 580 (W) × 740 (D) × 140 (H) mm
If you install a different location control BOX (D) size will be larger 130mm

Twist

The number of twist 1-1000 turn (set to every one turn) 10-990 turn (set to every 10 turns)
Twist portion length 100 ~ 350mm, however, the last to the type L is attached of the type 150 ~ 500mm
Twist rotation speed 37 ~ 5000rpm (stepless setting) 500 ~ 5000rpm (10 stage setting)
Motor 200W AC servo motor

Skein

Skein number of times 1-5 times 1-5 times
Scale in speed 20 ~ 1500mm / sec 0.55 to 6 seconds / Skein (10 stage setting)
Motor 200W
Cycle time 7 seconds (3 twist, if the twist number 300 turns)