Options | tension | ACT5KTC

Features

1. You can be freely set any number of times the tension set by a command from the automatic tension program function winding program.
2. By maintaining the tension bar to the specified angle in the closed-loop functions angle sensor and feedback control, stable tension value is obtained.
3. active feedback function winding acceleration and deceleration time of steep linear velocity Ina due to the change – Shah of influence, to realize the windings and stable to guarantee broken prevent certain tension By removing unnecessary frictional resistance in the wire route to you.
4. You can cover a wide range of tension range that you are replacing a wide range tension tension bar and spring.
5. The control ON / OFF with wire good workability and can stop the rotation of the tension pulley in the control OFF when setting the tension, it will prevent dangerous.
ATC5KTC

Specification

Tension range 6 ~ 80N However, tension bars and spring replacement is required.See Table 1
Linear range 0.4~1.0mm
Linear velocity 25m/sec
Body dimensions 246(H) 273(D) 190(W)mm(tension bar, not including protrusions
Body weight 9kg
Power supply AC200-230V ±10% φ1=11.5A,φ3=6.5A

Please contact our details. In addition, specifications are subject to change without notice.

Tension bar Tension range Use spring Proper tension range Tension capacity
TB62 9N~15N
0.4~0.55mm
TO26086
(Blue, 2)
9Nー13N 6Nー13N
TO26085
(Green, 2)
13Nー15N 10Nー22N
TB63 15N~50N
0.55~1.0mm
TO26084
(Yellow, 2)
15Nー22N 14Nー29N
TO20683
(Orange, 2)
22Nー40N 20N=42N
TO26086
(Blue,4)
15Nー25N 14Nー28N
TO26085
Green,4)
25Nー40N 20Nー45N
TO26084
Yellow、4)
30Nー50N 28Nー58N
TO20683
Orange、4)
43Nー50N 41Nー80N

Please use the proper tension range for stability of tension value.
Spring is a consumable item. Also in compliance with the proper tension range will be damaged by metal fatigue.
Life of the spring, can not be guaranteed in the free period.